Actiontec electronic GT701 User Manual
Page 39
36
Actiontec USB/Ethernet DSL Modem User Manual
37
Chapter 4 Using Advanced Setup
Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Modem to use the Point-to-Point over
Ethernet (
PPPoE
) or Point-to-Point over
ATM
(
PPPoA
) protocol.
“Broadband Connection via PPPoE” screen:
“Broadband Connection via PPPoA” screen:
If a User Name, Password and/or Static
IP
was entered in the Installation Buddy,
it should be displayed in the “Broadband Connection via
PPPoE/PPPoA
” screen. If
not, enter the information now. If the information is unavailable, contact the
ISP
.
PPP Auto Connect
If
PPP
auto connect is activated (by clicking in the appropriate check box), the
Modem will attempt to automatically redial the
PPP
connection if it is dropped
or disconnected during an online session. Actiontec recommends activating
PPP
Auto Connect.