Setting up static ip on the computer, Windows 98 se – Actiontec electronic GT701 User Manual
Page 70
Advertising
67
Setting Up Static IP
on the Computer
To communicate with the Modem from a computer (to use the Web Configuration
Utility, for example), the user may have to switch the
IP
address settings from
DHCP
-enabled to static
IP
, so that the computer and the Modem are on the same
network subnet.
To set up static
IP
on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Modem’s
factory default
IP
address. If the Modem’s
IP
address has been
changed, enter the new
IP
address when instructed to enter an
IP
address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
B
Advertising