Actiontec electronic GT701 - Manual (Page 58)

54
Actiontec USB/Ethernet DSL Modem User Manual
55
Chapter 6 Using Utilities
N
Warning: Do not unplug the Power cord from the Modem
or switch the On/Off switch to off during the Restore Default
Settings process. Doing so may result in permanent damage to
the Modem.
When the Power light stops flashing and glows steadily green, the Modem is fully
operational, and the default settings have been restored.
Upgrade Firmware
Selecting Upgrade Firmware in the “Utilities” screen generates the “Upgrade
Firmware” screen. Actiontec periodically posts firmware upgrades to enhance
the capabilities and boost the performance of the Modem. Follow the on-screen
instructions to upgrade the Modem’s firmware.