Device manager option, Network option, System option – APC Network Management Card none User Manual
Page 18: Hylfh 0dqdjhu rswlrq, 1hwzrun rswlrq, 6\vwhp rswlrq, Control console, Control console menus frqwlqxhg
Network Management Card User’s Guide
11
Device Manager
option
This option accesses the Device Manager menu. This menu’s options
allow you to select the device that you want to manage:
1- Environment
2- Smart-UPS 700
Note:
The
Environment
option is only present when an
Environmental Monitor is present.
For information about the menus used to manage a
UPS
and
Environmental Monitor, see
Device Manager Menus on page 26
Network option
To do any of the following tasks, see
:
•
Configure the Management Card’s TCP/IP settings.
•
Use the Ping utility.
•
Define settings that affect FTP, Telnet, the Web Interface,
SNMP, and Email.
System option
To do any of the following tasks, see
•
Control Administrator and Device Manager access.
•
Define the system
Name
,
Contact
, and
Location
values.
•
Set the
Date
and
Time
used by the Management Card.
•
Use file transfer protocols.
•
Reboot the Management Card.
•
Reset the Control Console settings to default settings.
•
Access system information about the Management Card.