Scheduled ups self-tests, 6fkhgxohg, Device manager menus – APC Network Management Card none User Manual
Page 39: Ups diagnostics frqwlqxhg
Network Management Card User’s Guide
32
Symmetra 3 Phase UPS.
The “Diagnostics” page in the Web Interface
provides buttons you use to perform self-tests (
Tests...
) or runtime
calibrations (
Calibrate...
).
Note:
In the Web Interface, the “Diagnostics” page reports the results
of the last self-test and last runtime calibration, as well as
Intelligence Modules
,
Power Modules
,
Batteries
, and
Communication Bus & Subsystems
status; in the Control
Console, you can use the
Detailed UPS Information
option to
access this status information.
Scheduled UPS
self-tests
A scheduling option allows you to control when a
UPS
self-test occurs.
The available selections are
Never
,
UPS Startup
,
Every 7 Days
, or
Every 14 Days
.
In the Web Interface, this option is located on the same page as the
diagnostic test options. In the Control Console, the location of this
option depends on the type of
UPS
:
•
Symmetra and Symmetra 3 Phase UPS models have a
Scheduled Tests
option in the
UPS
menu.
•
Smart-UPS or Matrix-UPS models have a
Self-Test Schedule
option which is accessed as follows:
a. Select
Configuration
from the
UPS
menu.
b. Select
General
from the
Configuration
menu.