APC Network Management Card none - Manual (Page 55)

Network Management Card User’s Guide 48
Events Menu
Event Actions (Web Interface only)
FRQWLQXHG
Event Log action You can disable the recording of events in the event log. By default, all
events are recorded, even events that have no severity level assigned.
Note: Even if you disable the Event Log action for all severity levels,
system (Management Card) events which have no severity level
assigned will still be logged.
For more information about this log, see Event Log on page 45 .
SNMP Traps action By default, the SNMP Traps action is enabled for all informational,
warning, and severe events. However, before you can use SNMP traps
for event notifications, you must identify each NMS (up to four), by its
specific IP address, that you want to send those traps to.
For information about how to define the trap receivers, see Event
Recipients on page 49 .
Email action By default, the Email action is enabled for all events that have a severity
level assigned. However, before you can use Email for event
notifications, you must define the Email recipients.
For information about how to define the Email recipients, see Email
Feature on page 50 .