APC Network Management Card none - Manual (Page 51)

Network Management Card User’s Guide 44
Network Management Card
Events Menu
Introduction
Overview The Events menu provides access to the options that you use to do the
following tasks:
• Access the event log.
• Define the actions to be taken when an event occurs, based on
the severity level of that event.
– Event logging
– SNMP trap notification
– Email notification
Note: You can only use the Web Interface to define which
events will use which actions, as described in
Event
Log on page 45 and How to Configure Individual
Events on page 53 .
• Define up to four SNMP trap receivers, by NMS-specific IP
address, for event notifications by SNMP traps.
• Define up to four recipients for event notifications by Email.
Menu options In the Web Interface, all of the events options are accessed through the
Events menu. In the Control Console, you access the available events-
related options, as follows:
• You use the Email option in the Network menu to define the
SMTP server and Email recipients.
• You use the SNMP option in the Network menu to define the
SNMP trap receivers.
• You use
C TRL -L to access the event log from any menu.
For information about the settings available for the Events menu
options, and for a more detailed description of the Email feature, see the
following descriptions:
• Event Log on page 45
• Event Actions (Web Interface only) on page 47
• Event Recipients on page 49
• Email Feature on page 50
• How to Configure Individual Events on page 53