APC Network Management Card none - Manual (Page 50)

Network Management Card User’s Guide 43
Device Manager Menus
Environment Menu
Overview The Status option (Web Interface) and the Threshold and Contact
Details option (Control Console) provide access to the status
information about the probes and contacts. The Status option in the
Web Interface also accesses the firmware information for the
Environmental Monitor. In the Control Console, the firmware information
is accessed through the
About Environmental Monitor option.
The Configuration option in the Web Interface provides access to all of
the configuration settings for the probes and contacts. In the Control
Console, individual options (
Trap Thresholds Probe 1 , Trap Thresholds
Probe 2 , and Contact Settings ) are used.
Probe status These fields report on the status for each probe.
Note: For information about the threshold values cited in the table,
see
Probe settings below.
Contact status Reports the name of each contact alarm, and whether or not the
contact’s alarm condition exists:
Yes , No , or Disabled . For information
about the contact alarm settings, see Contact settings below.
Probe settings You use the Setting fields to define the temperature or humidity values
you want to use for the thresholds, and the Trap fields to Enable or
Disable each threshold.
Contact
settings You use the Name fields to define the name you want to use for the
contact alarms, and the Trap fields to Enable or Disable each alarm.
6WDWXV )LHOG 'HILQLWLRQ
Temperature Identifies the ambient temperature sensed by the probe.
High or Low
Temperature
Violation
Identifies whether or not the current ambient temperature
violates the probe’s temperature threshold settings:
Yes , No , or
Disabled .
Humidity Identifies whether the relative humidity sensed by the probe.
High or Low
Humidity Violation
Identifies whether or not the current relative humidity violates
the probe’s humidity threshold settings:
Yes , No , or Disabled .