Asante Technologies 35160 - Manual (Page 2)

2
Quick Start Guide
Follow these steps to install your IntraCore switch:
1. Open the box and check the contents. See Chapter 1.3 Package Contents for a complete list of the
items included with your IntraCore switch.
2. Install the switch in an equipment or wall rack, or prepare it for desktop placement.
3. Connect the power cord to the unit and to an appropriate power source.
4. Connect network devices to the switch.
5. Refer to Chapters 3-5 to configure the IntraCore for configuration and management capabilities.
For more information on installing the switch, please refer to Chapter 2 Installation and Setup.