3 system administration configuration, 4 system ip configuration – Asante Technologies 35160 User Manual
Page 21
21
Accessing a Submenu
To access a submenu, type the command letter that corresponds with the configuration option you need to
use. For example, type a to access the System Administration Configuration Menu.
Most of the configuration options are described in detail in the rest of this chapter. The more advanced
configuration options are discussed in Chapter 4. Advanced Management.
3.3 System Administration Configuration
The System Administration Configuration Menu displays and allows you to change the name of the switch,
its location, and the contact information.
IntraCore 35160-T System Admin. Configuration Menu
Description: Asante Technologies, Inc. IntraCore 35160-T Version: FW(1.00C)
Object ID: 1.3.6.1.4.1.298.2.2.30
Name: Test
Location:
Contact:
<Cmd> <Description>
n Set System Name
l Set System Location
c Set System Contact Information
q Return to previous menu
Command>
Changing System Administration Info
To change the name, location, or contact information for the switch, use the following procedure:
1. Open the System Administration Configuration Menu by typing a in the Configuration Menu.
2. Type the command letter (n, l or c) of the item to be changed in the System Administration
Configuration Menu.
3. At the prompt, type the information you want to change.
Note: Each parameter is limited to 64 characters, including spaces.
To cancel a selected option, press ctrl-c at the command prompt.
4. Press
Enter. The system administration information changes take effect.
5. Type
q to quit and return to the Configuration Menu.
3.4 System IP Configuration
The System IP Configuration Menu displays and allows you to change the information needed to access the
switch over the network via in-band management.
IntraCore 35160-T System IP Configuration Menu
System MAC Address: 00:00:94:BF:00:46
System IP Address: xxx.xxx.xxx.xxx
System Subnet Mask: 255.255.255.0
System Default Router: 0.0.0.0
<Cmd> <Description>
i Set IP Address
m Set Subnet Mask
r Set Default Router
q Return to previous menu
Command>