17 user interface configuration – Asante Technologies 35160 User Manual
Page 36
36
3.17 User Interface Configuration
The User Interface Configuration Menu lets you set the idle time-out periods for both the console and telnet
user interfaces, change the password used for logging in to the Local Management Interface, and enable or
disable the Web server.
To display the User Interface Configuration Menu, as shown below, type u in the Configuration Menu.
IntraCore 35160-T User Interface Configuration Menu
Console UI Idle Time Out: Console UI idle time-out feature is disabled
Telnet UI Idle Time Out: 60 Min. HTTP Server Status: ENABLED
Telnet Sessions Status: Access Hosts:
Session Status Source IP
1 Active xxx.xxx.xxx.xxx 1. <empty>
2 Inactive <none> 2. <empty>
3 Inactive <none> 3. <empty>
4 Inactive <none> 4. <empty>
<Cmd> <Description>
c Set Console UI Time Out
t Set Telnet UI Time Out
p Change Administrator Password
a Add Access host
d Delete Access host
o Toggle to Enable/Disable HTTP Server
q Return to previous menu
Command>
3.17.1 Setting Console Idle Time-out Period
Use the following procedure to set the console idle time-out:
1. Type
c in the User Interface Configuration Menu. A prompt for the number of minutes is displayed.
2. Enter the desired idle time-out in minutes.
Note: The default time-out is 5 minutes. Range for time-out is 0-60 minutes (0 indicates no time-
out). To exit without making any changes, press ctrl-c.
3. Press
Enter.
The new Console UI Idle Time Out is reflected in the User Interface Configuration Menu.
3.17.2 Setting Telnet Idle Time-out Period
Use the following procedure to change the Telnet Time-out.
1. Type
t in the User Interface Configuration Menu.
A prompt for the number of minutes is displayed.
2. Enter the desired idle time-out in minutes.
Note: The default time-out is 5 minutes. Range for time-out is 1-60.
To exit without changes, press ctrl-c.
3. Press
Enter.
The new Telnet UI Idle Time Out is reflected in the User Interface Configuration Menu. After you have
configured the desired time-outs, type q to return to the previous menu.