Asante Technologies 35160 - Manual (Page 57)

57
Configure the variables by choosing the desired option from each drop-down menu.
5.5 Span Tree (Spanning Tree) Button
This button opens the Spanning Tree Protocol (STP) Configuration page, which shows the STP
Configuration of the IntraCore, as shown below.
STP configuration is explained in Chapter 4. Advanced Management. Click the STP Port Configuration
button to display the STP Configuration settings for each port (see the port configuration page below), or
configure the ports all together (globally) from the right side of the page. Click Apply Changes to have your
configuration take effect, or click the Restore button to restore the defaults.