Asante Technologies 35160 - Manual (Page 30)

30
3.9.3 Setting the MAC Address Age-Out Time
This option sets the Age-Out Time for the MAC Forwarding Table.
The Age-Out Time is the number of seconds that addresses remain in the table after being learned by the
switch. The default is 300 seconds.
Use the following procedure to set the MAC address Age-Out Time.
1. Access the Unicast Forwarding Database Configuration Menu by typing d in the Configuration
Menu.
2. Type t to set the MAC Address Age-Out Time.
3. Enter the new Age-Out time (in seconds) at the prompt.
4. Press
Enter.
The MAC Address Age-Out Time is changed and is displayed at the top of the Unicast Forwarding Database
Configuration Menu.
3.10 Security Management
See Chapter 4 Advanced Management.
3.11 VLAN Management
See Chapter 4 Advanced Management.
3.12 IP Multicast Traffic Management
See Chapter 4 Advanced Management.
3.13 Port Mirroring Configuration
Port mirroring allows you to configure the switch to copy all traffic associated with one port (the Monitor Port)
to a Mirror Port on the switch. You can connect the Mirror Port to a network analyzer or RMON probe for
packet analysis. You can configure the Monitor Port to send either transmitted or received traffic to the
Mirror Port.
IntraCore 35160-T Port Mirroring Configuration Menu Unit Type: [IntraCore 35160]
System Port Mirroring Status: [Disabled]
Monitor Port list:
1 <empty>
2 <empty>
3 <empty>
4 <empty>
<Cmd> <Description>
a Add Monitor Port
d Delete Monitor Port
t Toggle System Port Mirroring Enable/Disable
q Return to previous menu
Command>