HP ProLiant DL145 G3 Server - Manual (Page 47)

Using LO100 47
nonvolatile memory and can be changed through a web browser (" Changing user settings through a web
browser " on page 47 ) or through the CLP (" Changing user settings through the CLP " on page 48 ).
When using CLP, if you do not have the correct privileges a warning message appears. If you receive a
warning message, you must end the telnet connection and re-establish a connection. There are no
restrictions when logged in as either OEM or administrator. User and operator accounts have the
following access.
Option User Operator
Hardware Inventory Yes Yes
Virtual Power No Yes
Monitoring Sensors View only Yes
System Event Log Yes Yes
Network Settings No No
PET Configuration No No
User Configuration No No
Virtual KVM No No
Application License Key No No
Security Settings No No
Changing user settings through a web browser
The User Administration screen displays user information, enables you to modify user settings, and enable
or disable user accounts. The first user account is a fixed null value. You cannot change the properties of
the first user or use it to log in. Only the first two users (after the fixed null value) are enabled for login by
default. Users can only be enabled from the browser interface.
WARNING: Do not disable all user accounts. If you disable all user accounts you will not be
able to log in to LO100. HP recommends always leaving at least one user with administrative
privileges.
To modify user settings:
1. On the main menu navigation bar, click User Administration.
2. Enter the password in the Password and Confirm Password fields.