HP ProLiant DL145 G3 Server User Manual
Page 14
Configuration 14
c.
Press the down arrow (↓) key to scroll to Share NIC Mode option. Press the Enter key to toggle
between Enabled and Disabled. Select Enabled.
o
On ProLiant DL140 G3 servers, press the down arrow (↓) key to scroll to NIC Option. Press the
Enter key to toggle between Dedicated NIC or the Side-band NIC. Select Side-band NIC.
o
On ProLiant DL145 G3 servers:
a.
Press the down arrow (↓) key to scroll to IPMI Configuration. Press the Enter key.
b.
Press the down arrow (↓) key to scroll to the LAN Configuration menu. Press the Enter key. The
LAN Configuration screen appears.
c.
Press the down arrow (↓) key to scroll to LAN Controller. Press the Enter key to toggle between
NIC and UMP. Select UMP.
o
On ProLiant ML150 G3 servers:
a.
Press the down arrow (↓) key to scroll to IPMI Configuration. Press the Enter key.
b.
Press the down arrow (↓) key to scroll to Share NIC Mode option. Press the Enter key to toggle
between Enabled and Disabled. Select Enabled.
5.
Press the Esc key to return to the previous screen, or press the F10 key to save the changes and exit
Setup.
The dedicated TCP/IP over Ethernet management port, whether dedicated or shared, is a standard
Ethernet 10/100Mb interface that is connected to the network using a standard Ethernet cable. Before
using the dedicated management port, you must determine the DHCP IP address, set a static IP address,
or use the default static IP address.
Obtaining a DHCP IP address from the BIOS Setup Utility
By default, LO100 has DHCP enabled and automatically negotiates an IP address. To view the DHCP IP
address, run the BIOS Setup Utility or retrieve the DHCP IP address using CLP through the serial port
connection. To view the DHCP IP address using the BIOS Setup Utility:
1.
Power on the server by pressing the Power On/Off button on the front panel.
2.
When POST displays the message, ROM-Based Setup, press the F10 key. If the server has an
administrator password configured, the system prompts you to enter the password. If the server does
not have a password configured, the main screen of the BIOS Setup Utility appears.
3.
Press the right arrow (→) key to navigate to the Advanced menu.
4.
Press the down arrow (↓) key to scroll to IPMI. Press the Enter key.
5.
To obtain the DCHP IP address, choose one of these options:
o
On ProLiant ML110 G4 and ProLiant ML150 G3 servers, press the down arrow (↓) key to scroll
to the end of the menu to display the DHCP IP address.
o
On HP ProLiant ML115 G1 servers:
i.
Press the down arrow (↓) key to scroll the BMC LAN Configuration menu. Press the Enter key.
ii.
Press the down arrow (↓) key to scroll to the end of the menu to display the DHCP IP address.
o
On ProLiant DL140 G3 and DL145 G3 servers:
i.
Press the down arrow (↓) key to scroll to the LAN Settings submenu. Press the Enter key.
ii.
Note the DHCP assigned IP address for future reference.
6.
Press the Esc key to return to the previous screen, or press the F10 key to save the changes and exit
Setup.