HP Matrix Operating Environment Software User Manual
Page 80
Advertising
1.
Determine whether your DIO card is DLA or FLA using the hpvmhwmgmt -l -p dio
command.
2.
An Administrator must add the DIO cards to the hpvm pool and then label the cards with the
name of the network using the following commands:
hpvmhwmgmt -p dio -a 0/0/0/4/0/0/0
hpvmhwmgmt -p dio -m 0/0/0/4/0/0/0 —L <diolan>
3.
Any number of ports can be labeled with the same name. Each of these can be used for
different virtual servers.
NOTE:
Do not label two ports for DLA cards. Matrix infrastructure orchestration does not
support labeling two ports of the same DLA DIO card.
80
Installation and configuration
Advertising