AT&T NORTEL BCM50 - Manual (Page 15)

AT&T IP Flexible Reach Service
Nortel BCM50 Release 3.0 SIP Configuration Guide
© 2007 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T
logo and all other AT&T marks contained herein are trademarks of AT&T
Intellectual Property and/or AT&T affiliated companies. All other
marks contained herein are the property of their respective owners.
Under Configuration Æ Telephony Æ Dialing Plan ; select “Line Pools.” In
this case we selected “BlocA” under the “Pool” tab. We will use this line pool to
access the VoIP trunks. Additionally, all DN numbers that need to access the
VoIP trunks must be added to this pool. Please see the following screen shots
for an example configuration.
Figure 6: Assigning Line Pool to IP Trunks
Figure 7: Assigning DN to Line Pool
Issue 0.7 Page 15 of 37