AT&T NORTEL BCM50 - Manual (Page 24)

AT&T IP Flexible Reach Service
Nortel BCM50 Release 3.0 SIP Configuration Guide
© 2007 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T
logo and all other AT&T marks contained herein are trademarks of AT&T
Intellectual Property and/or AT&T affiliated companies. All other
marks contained herein are the property of their respective owners.
DN used the analog device and go to the “Capabilities and Preferences” tab.
On the lower navigation section, select “ATA Settings” and set the “ATA
device” to “Modem.”
Figure 17: Configuring analog DNs for fax
For T.38 fax requirements, ensure that the “ATA device” is set to “Telephone.”
Issue 0.7 Page 24 of 37