Modify web network management parameters, Interface uri, Access method – HP Intelligent Management Center Licenses User Manual
Page 108: Returned result, Interface uri access method returned result
Modify Web Network Management Parameters
Modify web network management settings for a device based on device ID.
Interface URI
/plat/res/device/{id}/updateWebMgrParam
Access Method
HTTP
PUT
Parameters
Path parameter
Device ID.
id
Long integer type. Required. No default value.
Message body
<device>
<webMgrProtocol>HTTP</webMgrProtocol>
<webMgrPort>80</webMgrPort>
</device>
Element description
device sub-elements
Protocol used by a lower-level network management
webMgrProtocol
String type. Optional. If the element does not exist, the value is not changed. If the element exists,
the value cannot be null.
Login port for a lower-level network management.
webMgrPort
Long integer type. Optional. If the element does not exist, the value is not changed. If the element
exists, the value cannot be null.
Returned Result
Status codes
•
204 (No Content): Success.
•
404 (Not Found): No data is found with the ID.
•
409 (Conflict): Failure. See “
.”
Message header
HTTP/1.1 204 No Content
...
108 Network Resource Management