HP Intelligent Management Center Licenses - Manual (Page 25)

operator must successfully log in to iMC with the new password, and then can pass iMC-RS
authentication.
•
By default, an operator can use all RESTful services offered by iMC-RS, regardless of the
operation rights restricted by the group to which the operator belongs.
•
An operator can access all iMC-RS resources, regardless of the access restrictions of the device
and user groups.
Once iMC is installed, you can directly access iMC-RS with "admin" as the username and password.
The admin operator can always access iMC-RS.
Verify iMC-RS availability
Follow these steps to verify the availability of iMC-RS:
1.
Enter "http://imc_host:port/imcrs/application.wadl" in the address bar of your browser
(Firefox is recommended), where imc_host is the hostname or IP address of the iMC server,
and port is the service port number (8080 by default).
2. In the identity authentication dialog box that appears, enter "admin" as the username and
password, and click OK.
3. If the browser displays an XML document with "<application>" as the root node, iMC-RS is
ready for you to use. If you encounter an error (such as a 404 error) in step 2 or 3, check
your iMC version and service.
iMC-RS Security Mechanism 25