Add operator, Interface uri, Access method – HP Intelligent Management Center Licenses User Manual
Page 39: Returned result, Interface uri access method returned result
Add Operator
Add an operator with specified information.
Interface URI
/plat/operator
Access Method
HTTP
POST
Message body
<operator>
<name>cccc</name>
<fullName>cccc</fullName>
<authType>0</authType>
<password>cccc</password>
<sessionTimeout>10</sessionTimeout>
<operatorGroupId>1</operatorGroupId>
<desc>cccc</desc>
<defaultAcl>0</defaultAcl>
<operatorAclList>
<operatorAcl>
<startIp>10.153.89.1</startIp>
<endIp>10.153.89.2</endIp>
<accessType>0</accessType>
<desc>allow 10.153.89.1–10.153.89.2</desc>
<aclOrder>1</aclOrder>
</operatorAcl>
</operatorAclList>
</operator>
Element description
For meanings of fields in the message body, see
“Query All Operators” (page 34)
Returned Result
Status codes
•
201 (Created): Success
•
409 (Conflict): Failure. See “
.”
Message header
If the operation succeeds, the Location field gives the URI of the new resource. The message body
is empty.
HTTP/1.1 201 Created
Location: http://localhost:8080/imcrs/plat/operator/4
Add Operator
39