HP Intelligent Management Center Licenses - Manual (Page 92)

Modify Login Method
Modify login method for a device based on device ID.
Interface URI
/plat/res/device/{id}/updateLoginType
Access Method
HTTP
PUT
Parameters
Path parameter
Device ID. id
Long integer type. Required. No default value.
Message body
<device>
<loginType>2</loginType>
</device>
Element description
device sub-elements
Login method. 0: None. 1: Telnet. 2: SSH. loginType
Integer type. Optional. If the element does not exist, the value is not changed. If the element exists,
the value cannot be null.
Returned Result
Status codes
•
204 (No Content): Success.
•
404 (Not Found): No data is found with the ID.
•
409 (Conflict): Failure. See “ Error Codes .”
Message header
HTTP/1.1 204 No Content
...
92 Network Resource Management