Query switch access binding, Interface uri, Access method – HP Intelligent Management Center Licenses User Manual
Page 253: Returned result, Interface uri access method returned result
Query Switch Access Binding
Query information about a switch access binding with the specified ID.
Interface URI
/res/access/ifAccessBind/{id}
Access Method
HTTP
GET
Parameters
Path parameters
Switch access binding ID.
id
Long integer type. Required. No default value.
Returned Result
Status codes
•
200 (OK): Success.
Message header
HTTP/1.1 200 OK
Message body
<ifAccessBind>
<id>1</id>
<deviceId>5</deviceId>
<deviceIp>10.153.89.1</deviceIp>
<deviceName>H3C</deviceName>
<ifDesc>GigabitEthernet4/0/7</ifDesc>
<bindType>1</bindType>
<terminalMac>2a:2b:2c:2d:2e:2f</terminalMac>
<terminalIp/>
<terminalName>2</terminalName>
<terminalMaintainer>2abcdef</terminalMaintainer>
<device>http://localhost:8080/imcrs/plat/res/device/5</device>
</ifAccessBind>
Elements
ifAccessBind sub-elements
Terminal access binding ID.
id
Long integer type.
Terminal IP address.
terminalIp
String type.
Terminal MAC address.
terminalMac
String type.
Query Switch Access Binding 253