Query alarms, Interface uri, Access method – HP Intelligent Management Center Licenses User Manual
Page 280: Interface uri access method, Parameters
Query Alarms
Query alarms with certain criteria.
Interface URI
/fault/alarm
Access Method
HTTP
GET
Parameters
Query parameters
Alarm level.
alarmLevel
Integer type, supporting multiple elements. Optional. No default value. For the valid values, see
Query Alarm Levels.
Alarm recovery status.
recStatus
Integer type. Optional. No default. For valid values, see Query Alarm Recovery Status.
Alarm acknowledgement status.
ackStatus
Integer type. Optional. No default. For valid values, see Query Alarm Acknowledgement Status.
Time range for the alarm query.
timeRange
Integer type. Optional. No default. For valid values, see Query Alarm Time Ranges.
Start time for the alarm query.
startAlarmTime
Long integer type. Optional. No default value.
End time for the alarm query.
endAlarmTime
Long integer type. Optional. No default value.
Alarm description.
alarmDesc
String type, supporting wildcard characters. Optional. No default value.
User who recovered the alarm.
acker
String type, supporting wildcard characters. Optional. No default value.
Alarm parameters.
paras
String type, supporting wildcard characters. Optional. No default value.
Custom view ID.
customView
Long integer type. Optional. No default value.
Device IP address.
deviceIp
String type, supporting wildcard characters and multiple elements. Optional. No default value.
Device ID.
deviceId
String type, supporting wildcard characters and multiple elements. Optional. No default value.
Alarm ID
id
Long integer type, supporting multiple elements. Optional. No default value.
Alarm category.
alarmCategory
Integer type. Optional. No default value.For the valid values, see Query Alarm Categories.
280 Network Alarm Management