HP Intelligent Management Center Licenses - Manual (Page 127)

Query Automatic Device Discovery Results
Query automatic device discovery results.
Interface URI
/plat/res/autodiscover/result
Access Method
HTTP
GET
Parameters
None
Returned Result
Status codes
•
200 (OK): Success.
Message body
<list>
<discoverResult>
<cmdCode>3</cmdCode>
<type>4</type>
<time>2011-07-01 13:59:34</time>
Automatic discovery has finished. </content>
<deviceIp>finished</deviceIp>
<result>Six devices have been discovered, where five are SNMP devices, and one is an ICMP device. 0 devices are
added.</result>
</discoverResult>
...
</list>
Element description
discoverResult sub-elements
Command codes. 0: Start automatic discovery. 1: Common message. 2: Automatic discover alarm.
3: Automatic discovery has stopped. cmdCode
Integer type.
Command type. 0: Error message common value. 1: Informational message common value. 2: Alarm
message common value. 4: Successful message common value. type
Integer type.
Discovered at. time
String type.
Content. content
String type.
Device IP. deviceIp
String type.
Result. result
String type.
Protocol. String type. deviceProtocol
Query Automatic Device Discovery Results 127