HP Intelligent Management Center Licenses - Manual (Page 395)

Modify Trunk Port
Modify the parameters of a trunk port on the device.
Interface URI
/vlan/trunk
Access Method
HTTP
PUT
Message body
PUT http://imc_host:8080/imcrs/vlan/trunk?devId=33
accept: application/xml
...
<trunkIf allowedVlans="3,7" ifIndex="2423" pvid="1"/>
Elements
Trunk port sub-elements
Device type ID. devId
Integer type. Required. No default value.
Port index, which uniquely identifies a port. ifIndex
Integer type. Required. No default value.
PVID of the trunk port. pvid
Integer type. Required. No default value.
Allowed VLAN. allowedVlans
String type. Optional. No default value.
Returned Result
Status codes
•
204 (No Content): Success.
•
409 (Conflict): Failure. See “ Error Codes .”
Example
Modify a trunk port on the device whose ID is 33. The new parameters are as follows: ifIndex=2434,
pvid=1, allowedVlan=3,7.
Request
PUT http://imc_host:8080/imcrs/vlan/trunk?devId=33
accept: application/xml
...
<trunkIf allowedVlans="3,7" ifIndex="2423" pvid="1"/>
Response
None
Modify Trunk Port 395