HP ProLiant SL2x170z G6 Server - Manual (Page 24)

Verbs
cd
version
exit
show
reset
load
help
/./map1/firmware/-> show fwversion
fwversion=0.59
/./map1/firmware/-> fwversion
Invalid command
/./map1/firmware/->
Specific commands
CLP syntax for specific commands is found in the sections that also describe the functionality through
the Web interface.
DCMI 1.0 support
LO100 supports Data Center Manageability Interface (DCMI). DCMI enables you to simplify
platform management implementations while enhancing robustness. Specifications are derived
from Intelligent Platform Management Interface (IPMI) 2.0, which has been widely adopted by the
computing industry for server management and system-health monitoring. For more information,
see the Intel website at
http://developer.intel.com/technology/product/DCMI/index.htm .
IPMI 2.0 support
LO100 supports the industry-standard IPMI 2.0. The IPMI specification defines standardized,
abstracted interfaces that can be used for monitoring and control functions that are built in to the
platform hardware.
In addition to supporting the mandatory commands for IPMI 2.0, the following additional IPMI 2.0
features are supported by LO100:
•
Additional IPMI 2.0 commands
Get Channel Cipher Suites ◦
◦ Set/Get Channel Security Keys
◦ Suspend/Resume Payload Encryption
•
Payload types
IPMI Message ◦
◦ RMCP+ Open Session Request/Response
◦ RAKP Message 1 / 2
◦ RAKP Message 3 / 4
•
Authentication algorithms
RAKP-none ◦
◦ RAKP-HMAC-SHA1
24 Using LO100