HP ProLiant SL2x170z G6 Server - Manual (Page 57)

Index
A
administration, 7
alert messages, 31
authorized reseller
HP contact information, 55
Technical support, 55
B
base management controller (BMC), 11
BIOS configuration, 11
BIOS Setup Utility
Monitoring sensors, 28
Obtaining a DHCP IP address from the BIOS Setup
Utility, 11
Updating the firmware, 14
BIOS upgrade, 14
BMC (base management controller), 11
browser-based setup, 46
C
certificates
Creating a certificate, 49
Importing a certificate, 49
Installing a certificate or private key through a web
browser, 50
Installing a certificate or private key through the CLP,
51
CLP (Command Line Protocol)
Accessing the system event log from the CLP, 32
Configuring network settings using the CLP, 48
Controlling server power through the CLP, 28
Installing a certificate or private key through the CLP,
51
Logging in through the CLP, 25
Network settings, 46
Specific commands, 24
Using CLP, 19
Using the system event log, 31
Using Virtual KVM, 33
CLP overview, 19
CLP, commands
Accessing the system event log from the CLP, 32
Configuring network settings using the CLP, 48
Controlling server power through the CLP, 28
Specific commands, 24
CLP, connection options, 19
CLP, general syntax, 19
Command Line Protocol (CLP)
Accessing the system event log from the CLP, 32
Configuring network settings using the CLP, 48
Controlling server power through the CLP, 28
Installing a certificate or private key through the CLP,
51
Logging in through the CLP, 25
Network settings, 46
Specific commands, 24
Using CLP, 19
Using the system event log, 31
Using Virtual KVM, 33
configuration, 7
configuration settings, 44
configuration, LOM processor, 7
configuration, network, 46
configuration, PET, 31
contact information
Before you contact HP, 55
HP contact information, 55
CR/LF translation, 52
D
data protection methods, 18
dedicated management port, 10
defining hot keys, 36
DHCP (Dynamic Host Configuration Protocol)
Configuring network settings using a web browser, 46
Configuring network settings using the CLP, 48
Obtaining a DHCP IP address from the BIOS Setup
Utility, 11
Platform event trap configuration, 31
DHCP addresses, 11
DHCP, enabling, 11
DSA (Digital Signature Algorithm), 49
Dynamic Host Configuration Protocol (DHCP)
Configuring network settings using a web browser, 46
Configuring network settings using the CLP, 48
Obtaining a DHCP IP address from the BIOS Setup
Utility, 11
E
encryption
Using SSH, 18
Using SSL, 18
event logs
Accessing the system event log from a web browser,
31
Accessing the system event log from the CLP, 32
Using the system event log, 31
Using Virtual KVM, 33
F
features, CLP, 19
features, IPMI 2.0, 24
features, LO100
New features, 5
Server management features, 5
features, SSL, 18
firmware, updating, 14
flash ROM, 14
H
hardware inventory, 43
57