HP Photosmart C4380 All-in-One Printer User Manual
Page 100
To replace the print cartridges
1.
Make sure the HP All-in-One is on.
CAUTION:
If the HP All-in-One is off when you open the print cartridge door to
access the print cartridges, the HP All-in-One will not release the cartridges for
changing. You might damage the HP All-in-One if the print cartridges are not
docked safely when you try to remove them.
2.
Make sure you have letter or A4 unused plain white paper loaded in the input tray.
3.
Open the print cartridge door.
The print carriage moves to the far right side of the HP All-in-One.
4.
Wait until the print carriage is idle and silent, and then lightly press down on a print
cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
If you are replacing the black or photo print cartridge, remove the print cartridge from
the slot on the right.
1 Print cartridge slot for the tri-color print cartridge
2 Print cartridge slot for the black and photo print cartridges
5.
Pull the print cartridge towards you out of its slot.
6.
If you are removing the black print cartridge in order to install the photo print cartridge,
store the black print cartridge in the print cartridge protector or an airtight plastic
container.
Troubleshooting tips
99
Trou
bles
ho
ot
ing