Load other types of paper – HP Photosmart C4380 All-in-One Printer User Manual
Page 40
Related topics
“Print a group of addresses on labels or envelopes” on page 57
Load other types of paper
The following types of paper are designed for special projects. Create your project in the
HP Photosmart Software or another application, set the paper type and size, and then
print.
HP Premium Inkjet Transparency Film and HP Premium Plus Inkjet Transparency
Film
▲
Insert the film so that the white transparency strip (with arrows and the HP logo) is on
top and is going into the input tray first.
NOTE:
For best results, set the paper type to transparency film before printing
on transparency film.
HP Iron-On Transfers
1.
Flatten the transfer sheet completely before using it; do not load curled sheets.
TIP:
To prevent curling, keep transfer sheets sealed in the original package until
you are ready to use them.
2.
Locate the blue stripe on the nonprinting side of the transfer paper and then manually
feed one sheet at a time into the input tray with the blue stripe facing up.
HP Greeting Cards, HP Photo Greeting Cards, or HP Textured Greeting Cards
▲
Insert a small stack of HP greeting card paper into the input tray with the print side
down; slide the stack of cards forward until it stops.
TIP:
Make sure the area on which you want to print is inserted first, print side
down in the input tray.
HP Inkjet labels
1.
Always use letter or A4 label sheets designed for use with HP inkjet devices (such as
HP inkjet labels), and make sure that the labels are no more than two years old. Labels
on older sheets might peel off when the paper is pulled through the HP All-in-One,
causing subsequent paper jams.
2.
Fan the stack of labels to make sure none of the pages are sticking together.
3.
Place a stack of label sheets on top of full-size plain paper in the input tray, label side
down. Do not insert labels one sheet at a time.
For best results, set the paper type and paper size before printing.
HP CD/DVD Tattoo labels
▲
Place one sheet of CD/DVD tattoo paper in the input tray with the print side down;
slide the CD/DVD tattoo paper forward until it stops.
NOTE:
When you use CD/DVD tattoo labels, leave the tray extender closed.
Load paper
39
Loa
d
o
rig
in
als and load
paper