HP Photosmart C4380 All-in-One Printer User Manual
Page 25
Network configuration page definitions
The network configuration page shows the network settings for the HP All-in-One. There
are settings for general information and 802.11 wireless.
This section contains the following topics:
•
•
Wireless (802.11) network settings
Related topics
•
“Print network settings” on page 22
•
General network settings
The following table describes the general network settings shown on the network
configuration page.
Parameter
Description
Network Status
Status of the HP All-in-One:
•
Ready: The HP All-in-One is ready to receive or transmit data.
•
Offline: The HP All-in-One is not currently connected to the network.
Active connection
type
Network mode of the HP All-in-One:
•
Wireless: The HP All-in-One is connected to a wireless (802.11) network.
•
None: There is no network connection.
URL
The IP address of the Embedded Web Server.
NOTE:
You will need to know this URL when you try to access the
Embedded Web Server.
Firmware
Revision
The internal networking component and device firmware revision code.
NOTE:
If you call HP Support, depending on the problem, you might be
asked to provide the firmware revision code.
Hostname
The TCP/IP name assigned by the installation software to the device. By
default, this is the letters HP followed by the last 6 digits of the Media Access
Control (MAC) address.
Admin Password
Status of the administrator's password for the Embedded Web Server:
•
Set: Password is specified. You must enter the password to make
changes to the Embedded Web Server parameters.
•
Not Set: No password is set. A password is not required for making
changes to the Embedded Web Server parameters.
mDNS
Some local and ad hoc networks do not use central DNS servers. They use
a DNS alternative called mDNS.
With mDNS, your computer can find and use any HP All-in-One connected
to your local area network. It can also work with any other Ethernet-enabled
device that appears on the network.
Chapter 5
24
Finish setting up the HP All-in-One
Finish set
up