HP Surestore 6.140 Tape Library - Manual (Page 144)

Understanding Errors and Troubleshooting
Diagnostic Support Tools
Chapter 4 4-38
Performing Operations
There are three basic operations in STM:
1. To select a device or devices:
• In xstm, click on the device icon.
• In mstm, move the cursor over the device, and press <SPACE>.
2. To run a tool:
Tools / <tool> / Run
3. To view logs after the tool completes:
Tools / <tool> / <log>
Using the STM Tools
• The Information tool creates an information log that contains
firmware revisions and other useful device data. After the tool has
created the log, you must then display it.
Tools / Information / Run
• The Verifier tool ensures the device is accessible by the operating
system.
Tools / Verify / Run
• The Exerciser tool stresses the device.
Tools / Exercise / Run
• The Diagnostic tool attempts to isolate a hardware problem to a Field
Replaceable Unit (FRU).
Tools / Diagnose / Run
• The Expert tool allows the user to interactively perform operations on
the device.
Tools / Expert Tool / Run