HP StorageWorks 8000 NAS - Manual (Page 144)

142 Enabling Virus and Backup Software
Enabling the NAS 8000 Backup Agent
The NAS 8000 backup agent is preinstalled and authorized, but you must
enable it.
1 In the Command View NAS web interface, click the Applications tab.
2 Navigate down the Applications tree and select hp omniback.
3 Select Actions > Enable/Disable Application.
4 Click Yes to enable to application.
You are now ready to back up files. Control of the backup processes and the
backup devices is provided in the OmniBack II Manager's interface. You can
use the interface to:
■ Import and configure the client (the NAS 8000)
■ Configure the tape devices connected to the NAS 8000
■ Configure the backup specifications
■ Run your backup and restore operations
These procedures are described in detail in the HP OpenView OmniBack II
Installation and Licensing Guide and the HP OpenView OmniBack II
Administrator's Guide . You can return to the Command View NAS web
interface to select snapshot behavior during backup or to set OmniBack II
agent parameters in the .omnirc file that could be necessary in special cases.