HP StorageWorks 8000 NAS User Manual
Page 69
Configuring Your System and Network 67
Co
nfig
uring
Yo
ur Sy
ste
m
a
nd
Ne
tw
ork
4
Select either:
—
Share Level Security:
Specify the Workgroup to which the NAS server belongs.
—
User Level Security (see your system administrator for the following
Windows security information):
a
Enter the Domain name. The system administrator must have already
created an account for the NAS server in the domain you choose to
join. This is on the planning worksheet in your SIM binder.
b
Enter the name or IP address for the Primary Domain Controller
(PDC).
c
Enter the correct User Name and Password for the administrator of the
PDC.
d
Enter the hostname or IP address for any Backup Domain Controllers
(BDC) used in your network. BDCs are generally set up by your
network administrator.
5
Click OK. The NAS server attempts to join the domain. The NAS server
will fail in its attempt to join the domain if the Windows domain controller
does not have an account for the NAS server.
Note
If you need to rejoin a Windows domain that the NAS server
had previously joined, you might need to reset or remove and
add the NAS server on the Windows domain controller that the
NAS server will attempt to rejoin.