HP StorageWorks 8000 NAS - Manual (Page 59)

Configuring Your System and Network 57
Co
nfig
uring
Yo
ur Sy
ste
m
a
nd
Ne
tw
ork
— setNetworkCardSubnetMask ethX X.X.X.X (first parameter is the port
designation and second parameter is the subnet mask).
— setNetworkCardGatewayAddress ethX X.X.X.X (first parameter is
the port designation and second parameter is the gateway address).
■ Enslave the first port to the bond. The bond will then assume the IP
configuration of the first port enslaved.
— bondEnslaveNetworkCard ethX bondY (first parameter is the port
being enslaved into the bond that is designated by the second
parameter).
■ Enslave the second port to the bond.
— bondEnslaveNetworkCard ethY bondY (first parameter is the port
being enslaved into the bond that is designated by the second
parameter).
To un-bond the ports take the following steps:
■ bondReleaseNetworkCard ethY bondY (first parameter is the port being
un-bonded from the bond that is designated by the second parameter).
Note The ports are being un-bonded in the reverse order that they
were enslaved.
■ bondReleaseNetworkCard ethX bondY (first parameter is the port being
un-bonded from the bond that is designated by the second parameter)
■ Reboot the NAS server.