HP StorageWorks 8000 NAS - Manual (Page 57)

Configuring Your System and Network 55
Co
nfig
uring
Yo
ur Sy
ste
m
a
nd
Ne
tw
ork
If you have DHCP enabled, NIC configuration occurs automatically.
Depending on your configuration, the DHCP server provides any or all of the
following parameters: IP Address, Subnet Mask, Gateway Address,
Broadcast Address, and DNS Domain Name.
To edit the IP configuration for a NIC port:
1 In the Command View NAS web interface, click the Configuration tab.
2 Navigate down the tree to TCP/IP > IP Addresses. A table lists:
— NIC Ports and Bond Channels
— Address configuration (whether it is manual, DHCP or bonded to a
bond channel)
— IP Address
— Gateway Address
— Subnet Mask
— Broadcast Address
— Management Port
— MAC Address
— Card speed
3 Select the Port you want to edit then select Actions > Edit Selected IP
Configuration.
4 Select an address configuration (manual or DHCP) from the drop-down
list. For a manual configuration, enter the IP Address, Gateway Address,
Subnet Mask, and Broadcast Address.
5 Click OK.