HP MSR Encryption Accelerators User Manual
Hp io accelerator version 3.2.3 linux user guide
Advertising
This manual is related to the following products:
AXL300 Accelerator SSL PCI Card, Thunderbolt-2 PCIe 1-port IO Card, Storage C-series Switch Accelerators, Fusion ioFX 410GB PCIe Accelerator, Thunderbolt 2-Port AiO Module, B-series Switch Accelerators, IO Accelerator for BladeSystem c-Class, HPAtalla AXL600L SSL Accelerator Card, PCIe IO Accelerators for ProLiant Servers
Table of contents
Document Outline
- HP IO Accelerator Version 3.2.3 Linux User Guide
- Abstract
- Notice
- Contents
- About this guide
- Introduction
- Software installation
- Installation overview
- Installing RPM packages on SUSE, RHEL, and OEL
- Building the IO Accelerator driver from source
- Upgrading device firmware from VSL 1.x.x or 2.x.x to 3.x.x
- Loading the IO Accelerator driver
- Setting the IO Accelerator driver options
- Upgrading the firmware
- Enabling PCIe power
- Using the device as swap
- Using the Logical Volume Manager
- Configuring RAID
- Understanding Discard (TRIM) support
- Setting up SNMP for Linux
- Maintenance
- Utilities
- Monitoring IO Accelerator health
- Performance and tuning
- NUMA configuration
- Resources
- Regulatory information
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index