HP Systems Insight Manager - Manual (Page 154)

Table F-4 Hosts file default parameters
Description Value Keyword
Unknown (Default) TYPE • Application
• Cluster
• Complex
• Desktop
• Enclosure
• Environmental Monitor
• Handheld
•
Hub
• KVM Switch
•
Management Processor
• Notebook
•
Partition
• Power Distribution Unit
•
Power Supply
• Printer
• Rack
• Resource Partition
• Remote Access Device
• Router
• Server
• Shared Resource Domain
• Storage Device
• Switch
• Tape Library
• Thin Client
• UPS
• Unknown
• Unmanaged
•
Workstation
Disabled (Default) 0 SNMP
Enabled 1
Disabled (Default) 0 HTTP
Enabled 1
System default (Default) 0 SNMP_TIM
Greater than 0
System default (Default) 0 SNMP_RET
Greater than 0
Read only (Default) Public SNMP_MON
<Community String >
No default <Community String> SNMP_CON
To use a hosts file to specify systems for an automatic discovery, add the hosts file name to the Ping inclusion
ranges, system (hosts) names, templates, and/or hosts files
section of the Discovery page under the
Configure general settings section. Enter the following statement: $Hosts_filename where Hosts_filename
is the name of the hosts file that you want to use.
154 Host file extensions