HP LaserJet Pro 200 color MFP M276nw - Manual (Page 127)

Control panel message Description Recommended action
Fax is busy.
Redial pending.
The fax line to which you were sending a fax
was busy. The product automatically redials
the busy number. Allow the product to retry sending the fax.
Call the recipient to ensure that the fax
machine is on and ready.
Check that you are dialing the correct fax
number.
Open the Service menu, and touch the Fax
Service button. Touch the Run Fax Test
button. This test verifies that the phone cord
is connected to the correct port and that the
phone line has a signal. The product prints a
report with the results.
If the error persists, contact HP. See
www.hp.com/support/ljcolorm276series or
the support flyer that came in the product
box.
Fax storage is full.
Canceling the fax receive.
During the fax transmission, the product ran
out of memory. Only the pages that fit into
memory will be printed. Print all of the faxes, and then have the
sender resend the fax. Have the sender
divide the fax job into multiple jobs before
resending. Cancel all fax jobs or clear the
faxes from memory.
Fax storage is full.
Canceling the fax send.
During the fax job, the memory filled. All
pages of the fax have to be in memory for a
fax job to work correctly. Only the pages
that fit into memory were sent. Cancel the current job. Turn the product off,
and then turn it on again. Try sending the
job again.
If the error reoccurs, cancel the job and turn
the product off and then on a second time.
The product might not have enough memory
for some jobs.
ENWW Solve fax problems 111