Configure the fax time, date, and header, Use the control panel, Use the hp fax setup wizard – HP LaserJet Pro 200 color MFP M276nw User Manual
Page 94: Use special characters in fax headers, Use the control panel use the hp fax setup wizard
Configure the fax time, date, and header
Use the control panel
To use the control panel to set the date, time, and header, complete the following steps:
1.
From the Home screen, touch the Setup button.
2.
Touch the
Fax Setup
menu.
3.
Touch the
Basic Setup
menu.
4.
Scroll to and touch the
Time/Date
button.
5.
Select the 12-hour clock or 24-hour clock.
6.
Use the keypad to enter the current time, and then touch the
OK
button.
7.
Select the date format.
8.
Use the keypad to enter the current date, and then touch the
OK
button.
9.
Touch the
Fax Header
menu.
10.
Use the keypad to enter your fax number, and then touch the
OK
button.
NOTE:
The maximum number of characters for the fax number is 20.
11.
Use the keypad to enter your company name or header, and then touch the
OK
button.
NOTE:
The maximum number of characters for the fax header is 25.
Use the HP Fax Setup Wizard
If you did not complete the fax setup process at the time you installed the software, you can complete it
at any time by using the HP Fax Setup Wizard.
1.
Click Start, and then click Programs.
2.
Click HP, click the name of the product, and then click HP Fax Setup Wizard.
3.
Follow the onscreen instructions in the HP Fax Setup Wizard to configure the fax settings.
Use special characters in fax headers
When using the control panel to enter your name in the header or to enter a name for a one-touch key,
speed-dial entry, or group-dial entry, touch the
123
button to open a keypad that contains special
characters.
78
Chapter 6 Fax
ENWW