HP StorageWorks 2.32 Edge Switch - Manual (Page 169)

Edge Switch Element Manager user guide 169
File transfer aborted. You aborted the file transfer process. Verify the file transfer is to be aborted,
then click OK to continue.
HAFM error <error number 1
through 8 >.
The HAFM application encountered
an internal error (1 through 8
inclusive) and cannot continue
operation.
Contact the next level of support to report
the problem.
Management server could not log
you on. Verify your username and
password.
An incorrect username or password
(both case sensitive) was used while
attempting to log in to the HAFM
application.
Verify the username and password with the
customer’s network administrator and retry
the operation.
Management server is shutting
down. Connection will be
terminated.
The HAFM application is closing and
terminating communication with the
attached product.
Reboot the HAFM appliance. If the
problem persists, contact the next level of
support.
Invalid character in field. An invalid character was entered in
the data field.
Remove invalid characters from the entry.
Invalid name. One of the following invalid names
was used: CON, AUX, COM1,
COM2, COM3, COM4, COM5,
COM6, COM7, COM8, COM9,
LPT1, LPT2, LPT3, LPT4, LPT5, LPT6,
LPT7, LPT8, LPT9, NUL, or PRN.
Select a valid name and retry the
operation.
Invalid network address. The IP address specified for the
product is unknown to the domain
name server (invalid).
Verify and enter a valid product IP
address.
Invalid port number. Valid ports
are (0-< nn >).
You have specified an invalid port
number.
Specify a valid port number, in the range 0
to the maximum number of ports on the
product minus 1. For example, for a switch
with 32 ports, the valid port range is 0–31.
Invalid product selection. At the New Product dialog box, an
invalid product was selected.
Select a valid product and retry the
operation.
Invalid request. Three conditions result in this
message:
• You tried to add or modify a
product from Product View and
the network address is already in
use. (Network addresses must be
unique.)
• You tried to create a new user
with a username that already
exists. (A username must be
unique.)
• You tried to delete the default
Administrator user. (The default
Administrator user cannot be
deleted.)
Select the action that is appropriate to the
activity that caused the error:
• Network address: Specify a unique
network address for the product.
• username: Specify a unique username
for the new user ID.
• Do not delete the default Administrator
user.
Table 7 HAFM messages (continued)
Message Description Action