HP StorageWorks 2.32 Edge Switch - Manual (Page 90)

Configuring the switch 90
11. To set the data speed for the port, click the Speed column for a specific port, and click 2
Gb/sec, 1 Gb/sec, or Negotiate (2 Gb/sec switch) or 1 Gb/sec only (1 Gb/sec switch).
Choosing Negotiate allows the port and attached device to negotiate the data rate.
12. Use the scroll bar on the right side of the Configure Ports dialog box table to display additional
ports that you want to configure.
13. Activate changes and close the dialog box by clicking Activate.
14. If you are finished configuring the switch, back up the configuration data. For more information,
see ” Backing up and restoring configuration ” on page 138.