HP Virtual Connect Enterprise Manager Software - Manual (Page 23)

Table 4 MAC or WWN address and serial number range compatibility (continued)
VCEM-supported
MAC or WWN or serial number in VC
Domain Group
VC Domain server profiles with MAC
or WWN addresses or serial number
allocated as:
Yes VCEM-defined or user-defined VCEM-defined, HP-predefined, or
user-defined
No Factory VCEM-Defined, HP-predefined, or
user-defined
The VC Domain configuration must be identical to the VC Domain Group configuration. Verify that
the following items are identical:
•
Interconnect bays location and model
•
Enclosure model
•
Domain settings:
Configuration for double density servers (for example, BL2x220c) ◦
◦ Configuration for full-height and half-height single density servers (for example, BL460c,
BL480c)
•
Ethernet and iSCSI Flex-10 settings:
◦ MAC Cache Failover:
Enable Fast MAC Cache Failover –
– MAC Refresh Interval
◦ IGMP Snooping:
Enable IGMP Snooping –
– IGMP Idle Timeout Interval
◦ Server VLAN Tagging support:
Tunnel VLAN Taggings or Map VLAN Taggings –
– Force Server connection setting
◦ Multiple Network Speeding Settings:
Preferred Link Connections –
– Preferred Link Connection Speed
– Maximum Link Connection
– Maximum Link Connection Speed
◦ Network SNMP settings:
– Read Community
– System Contact
– IP addresses
•
Fibre Channel SAN Fabric settings:
Enables SMI-S ◦
◦ Fibre Channel SNMP settings: Read Community, System Contact, and IP addresses
•
Network and Fibre Channel SAN Fabrics uplinks
Requirements for adding a VC Domain to a VC Domain Group 23