HP Virtual Connect Enterprise Manager Software User Manual
Page 31
Figure 13 Enhanced SNMP configuration
Do not configure the VC Domain using the enhanced SNMP configuration. If necessary, disable
the enhanced SNMP configuration by following these steps:
1.
Do not configure more than five SNMP trap destinations.
2.
Verify that all SNMP trap destinations follow these rules:
a.
The Destination Name must be in the following format:
<IP Address of the SNMP Trap Destination>_<Community
String>_<0 for VC-Enet and 1 for VC-FC>
(for example, 192.168.1.1_public_1)
b.
Select the “ipv4” option.
c.
Set the SNMP trap format to “SNMPv1.”
Figure 14 Adding or editing a compatible SNMP trap destination
d.
To disable trap severities, from the Add a SNMP Trap Destination page, click
Advanced, as shown in the following figure.
Requirements for adding a VC Domain to a VC Domain Group
31