Creating a server profile – HP Virtual Connect Enterprise Manager Software User Manual
Page 64
Table 9 VCEM features (continued)
Virtual Connect
2.1x
Virtual Connect
2.3x
Virtual Connect
3.0x
Virtual Connect
3.10
Virtual Connect
3.15
Feature
•
•
•
Add up to 128
Ethernet
connections
•
•
•
Add extended FC
connections for
multi-blade
systems
•
•
Add or remove
Flex-10 iSCSI
connections
•
•
iSCSI boot for
Flex-10
•
•
Add or remove
FCoE connections
From the managing server profiles screen, you can perform the following tasks:
•
Create a server profile
•
Delete one or more server profiles
•
Edit a server profile
•
Assign a server profile
•
Unassign a server profile
•
Copy a server profile to a bay
•
Move a server profile
•
View network and Fibre Channel information for a server profile
•
Perform a VC Server Profile Failover operation
•
Export a server profile to a different VC Domain Group
NOTE:
If the server profile has Flex-10 connections enabled, and server blade NICs (onboard
or mezzanine card) are connected to HP 10/10Gb-F Virtual Connect Ethernet Module, Virtual
Connect requires you to power off the server blade to perform server profile operations with VC
firmware 2.1x. However, in VC firmware 2.3x or 3.0x, you can perform these operations with
the server blade powered on.
Creating a server profile
NOTE:
Keep the following server profile dependencies in mind:
•
Depending on the VC Domain version, the create server profile page displays a different set
of configurations. To verify the available features for each VC Domain version, see
•
In a VC Domain Group with VC firmware 2.1x, the 8 Gb FC module appears only if VCEM
detects it. If VCEM detects the 4 Gb FC module, then the maximum port speed will be 4 Gb.
•
The server profile can contain only one specified FC or iSCSI or FCoE boot option.
1.
From the Server Profiles page, click New.
64
Managing server profiles