HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 19)

Command line 19
Item Description
DoubleDense
(Optional)
If the enclosure being imported supports double-dense server blades, then this
property enables the device bay display format to support a display for
double-dense server blades. The default behavior is display for single-dense
server blades in the enclosure.
Examples
->import enclosure UserName=Administrator
Password=fgg7h*1
Imports the local enclosure
->import enclosure UserName=Administrator
Password=fgg7h*1 DoubleDense=true
Imports the local enclosure with a double-dense device bay display format
-> import enclosure 192.168.0.120 UserName=MyOaUser
Password=dgfsfdsjd
Imports a remote enclosure into the domain
Item Description
remove enclosure Remove a remote enclosure that has been imported into the domain. The local
enclosure is not allowed to be removed from the domain using the remove
enclosure command.
Syntax remove enclosure <EnclosureID | *>
Parameter
EnclosureID
(Required)
The enclosure ID of the remote enclosure to be removed from the domain,
where "*" removes all the remote enclosures that exist in the domain. The
enclosure IDs can be identified for a particular enclosure by using the show
enclosure command. The local enclosure cannot be removed from the
domain with this command.
Examples
->remove enclosure encl
Removes a remote enclosure
->remove enclosure *
Removes all remote enclosures from the domain
Item Description
show enclosure Display all enclosures in the domain.
Syntax show enclosure [<EnclosureID>|*]
Parameter
EnclosureID
(optional)
The ID of an enclosure in the domain. If specified, then only details for the
specified enclosure are displayed.
Examples
->show enclosure
Displays a summary listing of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure