HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 65)

Command line 65
Item Description
remove uplinkport Remove an uplink port element from a network or a shared uplink port set.
Syntax
remove uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSetName>]
Parameters
PortID (required) The name of the port to remove from a network (required). The port name must be in
the following format:
<EnclosureID>:<InterconnectBayNumber>:<PortNumber>
If EnclosureID is not specified, it defaults to the local enclosure.
Network
(optional)
The name of the network from which the port is to be removed
UplinkSet
(optional)
The name of the shared uplink port set from which the port is to be removed
Examples
->remove uplinkport enc0:1:2 Network=MyNetwork
Removes a specific uplink port (Bay 1, Port 2) from a network
->remove uplinkport * Network=BlueNetwork
Removes all uplink ports from a network named "BlueNetwork"
->remove uplinkport enc0:2:3 UplinkSet=SharedUplinkSet1
Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set
Item Description
set uplinkport Modify an uplink port that exists as a member of a network or shared uplink port set.
Syntax set uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSetName>][Speed=<Auto|10Mb|100Mb|1Gb|Disable
d>] [Role=<Primary|Secondary>]
Parameter
PortID (required) The name of the port to modify (required). The specified port must already be added
to a network or uplink port set. The port name is in the format
<EnclosureID>:<BayNumber>:<PortNumber>
Properties
Network
(optional)
The name of the network to which the port belongs
UplinkSet
(optional)
The name of the shared uplink port set to which the port belongs
Speed (optional) Specifies the port speed for the port. Acceptable values include "Auto", "10Mb",
"100Mb", "1Gb", and "Disabled".
Role (optional) The role played by the port if the connection mode of the network or shared uplink
set is selected as "Failover". The default value is "Primary".
Examples
->set uplinkport enc0:1:2 Network=MyNetwork Speed=1Gb
Changes the port speed of a network port
->set uplinkport enc0:2:1 Network=MyNetwork Speed=Disabled
Disables a specific port that belongs to a network