HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 47)

Command line 47
Item Description
SerialNumber
(required if the
SNType is User-
Defined)
A custom user-defined serial number associated with the server profile. When the
profile is assigned to a device bay that contains a server, the server inherits the
virtual serial number. The user-defined serial number must start with the pattern
VCX01.
UUID (Optional) A unique 128-bit identifier for the virtual server ID. The format is xxxxxxxx-xxxx-
xxxx-xxxx-xxxxxxxxxxxx where x is any alpha-numeric character. If no UUID is
specified, then one is auto-generated. The UUID can be specified only if the
SNType is User-Defined.
Examples
->add profile MyNewProfile
Creates a new profile and adds it to the domain, using default connections
->add profile MyNewProfile2 -NoDefaultEnetConn
Creates a new profile without adding default Ethernet connections
->add profile MyNewProfile2 -NoDefaultFcConn
Creates a new profile without adding default FC connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn
Creates a new profile without adding default Ethernet and FC connections
->add profile MyNewProfile SNType=Factory-Default
Creates a new profile and uses the factory assigned serial number
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121 UUID=15713c60-fcf2-11dc-
a656-0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile
Assign a server profile to a device bay.
Syntax assign profile <ProfileName> <DeviceBay> [-PowerOn]
Parameters
ProfileName
(required)
The unique name of the server profile to assign
DeviceBay
(required)
The device bay to assign the profile to, in the format
EnclosureID:DeviceBayNumber
If EnclosureID is not specified, it defaults to the local enclosure.
Option
PowerOn Power on the server after the profile has been assigned.
Example
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
Item Description
remove profile
Remove one or more server profiles from the domain.
Syntax remove profile <ProfileName | *>