HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 56)

Command line 56
Item Description
SmisEnabled
(optional)
Enables or disables SMIS. This property is valid only for VC-FC modules. The
default value is "false". Valid values include "true" or "false".
Examples
->set snmp enet ReadCommunity=mydatacenter1
[email protected] Enabled=true
Enables the SNMP agent for VC-Enet modules and supplies a community string
->set snmp fc ReadCommunity=mydatacenter2
[email protected] Enabled=true
Enables the SNMP agent for VC-FC modules
->set snmp domain Enable=true
Enables the VC domain agent
->set snmp domain [email protected]
Sets the VC Domain system contact
Item Description
show snmp Display the SNMP configuration settings for the VC domain.
Syntax show snmp [Type]
Parameter
Type (optional) Indicates the type of SNMP configuration to display. If the type is not specified,
all VC SNMP configuration information is displayed. Valid values include "Enet",
"FC", and "Domain".
Examples
->show snmp Enet
Displays SNMP configuration for VC-Enet modules only
->show snmp FC
Displays SNMP configuration for VC-FC modules only
->show snmp
Displays SNMP configuration for the VC domain and modules
-> show snmp domain
Displays SNMP configuration for the VC domain
snmp-trap
Displays SNMP trap information
Supported actions: add, remove, set, show, test
Item Description
add snmp-trap Adds a new SNMP trap destination.
Avoid using duplicate trap destinations. Setting duplicate trap destinations can
result in duplicate traps being sent to the same destination, or only one of the
trap destinations being configured.