HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 22)

Command line 22
Item Description
->remove enet-connection MyProfile
Removes an Ethernet network connection from a profile.
Item Description
set enet-connection Modify an Ethernet connection of a server profile.
Syntax set enet-connection <ProfileName> <Port>
[Network=<NetworkName>]
[PXE=<enabled|disabled|UseBios>]
[SpeedType=<Auto|Preferred|Custom>] [Speed=<speed>]
Parameters
ProfileName (required) The name of the server profile that contains the connection to modify
Port (required) The port number of the connection being modified
Properties
NetworkName The name of the Ethernet network to associate with the connection.
Applies to Ethernet network connections only. A blank string makes the
Ethernet connection unassigned.
PXE Enables or disables PXE on a connection. Valid values are "enabled",
"disabled", and "UseBios". Applies to Ethernet network connections
only.
PXE can be enabled on one connection per profile.
SpeedType (optional) The requested operational speed for the server port. Valid values
include "Auto", "Preferred", and "Custom". The default value is
"Preferred".
If the speed type is "Auto", the maximum port speed is determined by
the maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as
the preferred speed of the network to which the connection is
associated. If no preferred speed is configured for a network, it defaults
to "Auto".
If the speed type is "Custom", the user can configure any speed from
100Mb-MAX Configured speed for the network in 100Mb increments.
Speed (required if the
SpeedType is "Custom")
The user-defined speed for the server port. Valid values include 100Mb-
MAX Configured speed for the network in 100Mb increments.
Examples
->set enet-connection MyProfile 2
NetworkName=NewNetworkName
Changes the network of an Ethernet connection
->set enet-connection RedProfile 1 NetworkName=""
Sets a network connection to "Unassigned"
->set enet-connection GreenProfile 3 PXE=disabled
Disables PXE on an Ethernet connection
->set enet-connection MyProfile 1
SpeedType=Preferred
Modifies the Ethernet network connection to set the speed to "Preferred"